Toshiba V.92 - Manual (Page 82)

82 S-Registers
S-Register values
5.375 x 8.375 ver 2.4.0
S-Register values
❖ The format for displaying the value of an S-Register is:
ATSn?
where n is the register number. After you type in the
register press
Enter .
❖ The format for modifying the value of an S-Register is:
ATSn=r
where n is the register number, and r is the new register
value. After you type in the register number and its new
value press
Enter .
S0 Auto answer ring number
This register determines the number of rings the modem will
count before automatically answering a call. Enter
0 (zero) if
you do not want the modem to automatically answer at all.
When disabled, the modem can only answer with an ATA
command.
S1 Ring counter
This register is read-only. The value of S1 is incremented
with each ring. If no ring occurs over a six-second interval,
the register is cleared.
Range: 0-255
Default: 0
Units: rings
Range: 0-225
Default: 0
Units: rings