Gentec-EO QUAD-4Track - Manual (Page 19)

QUAD-4Track User’s Manual Revision 2.1 19
The X position of the beam on the detector surface in millimeters. The units are only
visible when the Beam Position has been calibrated.
Y (mm)
The Y position of the beam on the detector surface in millimeters. The units are only
visible when the Beam Position has been calibrated.
Pulse Energy
The total energy in the beam. This is the sum of each of the energies measured by the
quadrants.
If any of the 4 channels is over ranged, this indicator's background will turn red.
Quad Energy A
The energy in the portion of the beam incident on quadrant A, the upper right quadrant.
If the channel is over ranged, this indicator's background will turn red.
Quad Energy B
The energy in the portion of the beam incident on quadrant B, the upper left quadrant.
If the channel is over ranged, this indicator's background will turn red.
Quad Energy C
The energy in the portion of the beam incident on quadrant C, the lower left quadrant.
If the channel is over ranged, this indicator's background will turn red.
Quad Energy D
The energy in the portion of the beam incident on quadrant C, the lower right quadrant.
If the channel is over ranged, this indicator's background will turn red.
Frequency (Hz)
The frequency (pulse repetition rate) of the pulses being measured.
Triggered
Illuminates when the instrument is triggered and sending data to the VI. If triggers stop,