Hauler Racks C-12 SERIES RACKS User Manual

Page 6

Advertising
background image

4. Install rear crossbar.

The rear crossbar is the rectangular extrusion with a ribbed bottom and square bolt holes in each end.


Using (4) 3/8”-16 x 2” carriage bolts, (4) 3/8” split lock washers and (4) 3/8”-16 nuts, secure the rear
crossbar to the ‘Y’ brackets mounted at the ends of the rear rails sections. Finger tighten hardware only.

HAULER RACKS, INC.

Toll Free: 1-800-843-5445

7109 31

st

Avenue North Phone: 763-546-5620

Minneapolis, MN 55427-2848 Fax: 763-546-0933

Page 6 of 14 WWW.HAULERRACKS.COM

Advertising
This manual is related to the following products: