Keter Kid's High Chair - Manual (Page 2)

PARTS INCLUDED:
1 Highchair
1 Seat pad
1 Tray
1 Front legs base
2 Back legs bases
PLEASE READ INSTRUCTIONS BEFORE ATTEMPTING ASSEMBLY
ASSEMBLY:
Carefully assemble the front
legs base and snap it tight.
1
Carefully assemble the back leg
bases onto the back legs and
snap them tight.
2
Carefully open the chair legs until you
click them securely into position.
3
Carefully push the seat and tray down
into position by security locks. Push
the front of the seat down and click
the back lock onto the catch at the
rear of the back.
4
A
B
D C
D
Pull up, in a straight line with one
hand to secure the correct high chair
position, ensuring the hooks are
securely located.
5
To adjust the large tray, push the
clips and lock it onto the small tray.
6
The large tray can be removed with
one hand.
7
Put the chair into its lowest position,
carefully unlock the back security lock
and fold up.
8
YOUR COMBINATION HIGHCHAIR MAY BE USED IN A VARIETY OF WAYS
Folding:
The high chair has 6 height positions, which allow you to use it as a normal
high chair, to reduce the height allowing you to use it at the family dinner table,
and it also allows the mother the freedom to sit down whilst feeding the child.
Press the side release buttons and fold
the legs.
9
Now the high chair can be stored in
a minimum amount of space.
10
high-chair-inst_back_A4_541485.ai 25/3/2010 1:38:03 PM high-chair-inst_back_A4_541485.ai 25/3/2010 1:38:03 PM