KISAE MW 1204 Power Inverter 400 - Manual (Page 5)

Page 5
2. PRODUCT DESCRIPTION
The KISAE Power Inverter package includes the items list below.
 Power Inverter base unit (MW1204)
 Owner’s manual (P/N: MU MW1204)
3. INSTALLATION
WARNING: KISAE Technology recommends that all wiring be done by a certified
technician or electrician to ensure adherence to the applicable electrical safety wiring
regulations and installation codes. Failure to follow these instructions can damage the unit
and could also result in personal injury or loss of life.
CAUTION:
Before beginning your KISAE Power Inverter Installation, please consider the following:
 The KISAE Power Inverter base unit should be used or stored in an indoor area away from
direct sunlight, heat, moisture or conductive contaminants.
 When placing the unit, allow a minimum of three inches of space around the unit for optimal
ventilation.
Understanding the unit features
AC Output Front Panel
DC Input Rear Panel
Material Prepare for Installation
Typical Wiring block diagram of the Power Inverter:
Fan
opening
DC Input Terminals
‘Power’ indicator
‘Fault’ indicator
On/Off Switch
Power Inverter
(MW 1204)
Disconnect
Switch
Fuse or Circuit
Breaker
12 V Battery Bank
(Charger system
sold separately is
required to charge
the battery bank
when battery is
discharged)
Pos +
Neg - AC
LOADS