KISAE MW 1204 Power Inverter 400 User Manual

Page 9

Advertising
background image

Page 9

6. SPECIFICATIONS

Note: Specifications are subject to change without notices.

Specification MW

1204

Inverter
AC Output Power

400W

AC Output Current

3.3A

AC Surge Power (Peak)

800W

AC Output Voltage

120 VAC / 60 Hz

AC Output Waveform

Modified Sinewave

Nominal DC Input Voltage

12.5 VDC

No Load battery draw

< 0.3 ADC

DC Input Voltage operating range

10.5 – 15.5 VDC

Under Voltage Alarm

11.2 VDC

Under Voltage Shutdown

10.5 VDC

Under Voltage Recovery

11.8 VDC

Over Voltage Shutdown

15.5 VDC

Safety and Environmental
Conformance

Conforms to UL 458

Certified to CSA C22.2 no. 107.1

Agency Markings

cETLus

Operating Temperature

0°C to 40°C (32°F to 104°F)

Storage Temperature

-20°C to 60°C (-4°F to 140°F)

Relative Humidity

5-90% noncondensing

Operating Altitude

Up to 9,843ft (3000 meters) above sea level

Weights and Dimensions
Weights

1.6 lbs (0.73 kg)

Dimensions

4 x 6 x 2” ( 101 x 152 x 51 mm)

7. WARRANTY

One Year Limited Warranty

The limited warranty program is the only one that applies to this unit, and it sets forth all the
responsibilities of KISAE. There is no other warranty, other than those described herein. Any
implied warranty of merchantability of fitness for a particular purpose on this unit is limited in
duration to the duration of this warranty.
This unit is warranted, to the original purchaser only, to be free of defects in materials and
workmanship for one year from the date of purchase without additional charge. The warranty
does not extend to subsequent purchasers or users.
Manufacturer will not be responsible for any amount of damage in excess of the retail purchase
price of the unit under any circumstances. Incidental and consequential damages are specifically
excluded from coverage under this warranty.
This unit is not intended for commercial use. This warranty does not apply to damage to units
from misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper
polarity power sources.

RETURN/REPAIR POLICY:

If you are experiencing any problems with your unit, please contact our customer service
department at [email protected] or Phone 1 604 320-7857 before returning product to
retail store. After speaking to a customer service representative, if products are deemed non-
working or malfunctioning, the product may be returned to the purchasing store within 30 days of
original purchase. Any defective unit that is returned to manufacturer within 30 days of the date of

Advertising
This manual is related to the following products: