KISAE SW 1220 Power Inverter 1000/2000 User Manual
Page 5
Page 5
against harmful interference in a residential installation. This equipment generate, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
LIMITATIONS ON USE
Do not use in connection with life support systems or other medical equipment or devices.
2. PRODUCT
DESCRIPTION
The KISAE Power Inverter package includes the items list below.
Power Inverter base unit (one of the following models)
MW 1210: Power Inverter 1000 (Modified Sinewave)
MW 1215: Power Inverter 1500 (Modified Sinewave)
SW 1210: Power Inverter 1000 (True Sinewave)
SW 1220: Power Inverter 2000 (True Sinewave)
Owner’s manual (P/N: MU MW1215)
3. INSTALLATION
WARNING:
KISAE Technology recommends that all wiring be done by a certified
technician or electrician to ensure adherence to the applicable electrical safety wiring
regulations and installation codes. Failure to follow these instructions can damage the unit
and could also result in personal injury or loss of life.
CAUTION:
Before beginning your KISAE Power Inverter Installation, please consider the following:
The KISAE Power Inverter base unit should be used or stored in an indoor area away from
direct sunlight, heat, moisture or conductive contaminants.
When placing the unit, allow a minimum of three inches of space around the unit for optimal
ventilation.
Understanding the unit features
AC Output Front Panel
Picture shown MW1210
GFCI Output
Status Indicator
Display
On/Off Switch
Output Port for optional
remote switch
USB Output