Specifications – KISAE AC1260 Abso Charger 12V 60A User Manual
Page 14
Page 14
6. SPECIFICATIONS
Note: Specifications are subject to change without notices.
Charger Output:
AC 1220 / AC 1240 / AC 1260
Output Current (Maximum)
20A / 40A / 60A
Output Voltage Range
Charge
14.2 - 15.5 V
Float
13.4 - 13.8 V
Equalize
16.0 V
Charging Control
Three stages (Bulk/Absorption/Float)
Two stages (Bulk/Absorption)
Constant Power Supply (Program setting)
DC Output Bank
Three
Selectable Battery Type
Gel, AGM, Flooded, Lithium, Program
Parasitic Current
< 2 mA
Charger Input:
AC Input Voltage (Nominal)
100, 120, 220, 230, 240 VAC
AC Input Operating Range
90 - 265 VAC
AC Input Frequency Range
47 - 63 Hz
Power Consumption (Full Load)
350W / 700W / 1050W
Power Factor Correction
Yes
Charger Efficiency
> 82%
Protection and Features:
Reverse Battery
Yes, unit shutdown
Over Charge
Yes, unit shutdown
Over Temperature
Yes, unit de-rated and shutdown
Output Short Circuit
Yes, unit shutdown
DC Fuse
2*15A, 32V / 2*30A,32V / 3*30A,32V
Cooling
Force air ventilation
Temperature Setting
Hot, Normal, Cold (no sensor connected)
Battery Temperature Sensor Port
RJ12 (optional battery sensor use)
Digital Display Port
RJ12 (optional display panel use)
Display:
LCD Display (with back lighting)
Charging status, Battery Voltage
Warning and Fault Code
A01-02, E01-09
Digital Display Port
RJ12, use with optional display panel
AC Input and DC Output Connection:
AC Input Connection
Hardwire or AC Cord
DC Output Connection
Heavy Duty Studs (3 banks)
DC Output Ground
Single Heavy Duty Common Ground Stud
Environmental and Operating Temperature:
Storage Range
-40° to 70° C (-40° to 158° F)
Operating Range
-20° to 60° C (-4° to 140° F)
Humidity
5-95%, RH non-condensing
Ingress Protection
IP32
Based Unit Weight and Dimensions:
AC 1220
5.3 lb., 11.6 x 8.1 x 3.4 inches
(2.4 Kg, 295 x 206 x 86 mm)
AC 1240
5.7 lb., 11.6 x 8.1 x 3.4 inches
(2.6 Kg, 295 x 206 x 86 mm)