Product description, Understanding the unit – KISAE AC1260 Abso Charger 12V 60A User Manual
Page 5
Page 5
2. PRODUCT DESCRIPTION
The KISAE Abso Charger includes the items list below.
• Base unit (AC1220 or AC1240 or AC1260)
• Owner’s manual (P/N: MU IC1210)
3. UNDERSTANDING THE UNIT
Typical wiring block diagram of the Battery Charger with 3 batteries bank:
Battery Bank_1, _2, _3:
• The charger can charge four different types of batteries (GEL, AGM, Flooded and Lithium)
and each battery bank can have its own bulk, absorption and float current setting.
• By setting the battery type to ‘Program’, the charger will act as a power supply and can
provide power to Bank_1 only. Bank_2 and Bank_3 are disabled.
Branch Breaker:
For AC Input hardwire charging systems, it is required to use a 15A branch breaker to connect
between the AC source and the charger AC input.
AC Source:
The charger accepts full universal input voltage (90-265Vac, 47-63Hz).
Digital Display Port:
Use for external display
The interface port is used for connecting an optional external display. The external display has
identical functions to the built-in display.
Use for PC interface
• A KISAE Abso Charger PC Interface Kit (sold separately) is available and is used to connect
between the port and the PC. This can be used to monitor and make changes to the charger
settings.
• Full details of the KISAE Abso Charger PC Interface Kit, it can be found on the KISAE website
www.kisaetechnology.com
and you can also consult your dealer for more details.
Battery Temperature Sensor Port:
CAUTION: RISK OF BATTERY DAMAGE. If temperature sensor is not being used, never set
the battery temperature lower than the actual temperature. This may overcharge and damage
AC Output Wiring
Compartment
AC Input Wire Strain
Relief
Battery Temperature
Sensor Port
Digital Display Port
Battery Pos: Bank 1
Charger
Battery Pos: Bank 2
Battery Pos: Bank 3
Battery Neg : Common
12V Battery Bank 3
12V Battery Bank 2
12V Battery Bank 1
Branch
Breaker
AC Source:
(90-265Vac,
50Hz/60Hz)
Battery Neg
(Common)
Unit GND
Battery Pos:
(Bank 1)
Battery Pos (Bank 2)
Battery Pos (Bank 3)
DC Output fuses