Avaya 580 - Manual (Page 517)

Document No. 10-300077, Issue 2 16-23
Configuring IPX Routing
4. Click on the SEARCH to start the search.
— If available services are found they are displayed in IPX Service
Table Web page.
— If services are not available, a message displays in the IPX
Service Table Web page.
Displaying the IPX Service Table
To display the IPX service table:
1. Perform an IPX Service table search as described in “ Searching the IPX
Service Table ” earlier in this chapter. If available services are found
they are displayed in the IPX Service Table Web page.
2. See Table 16-11 to review each field in the IPX Services table:
Service Name Search the IPX Service Table using a service name you
specify. Note that you can specify a single asterisk (*) to
indicate a wildcard character that will match all characters
entered before the wildcard. For example, entering FS_ENG*
will find all service names that start with FS_ENG.
Service Type Search the IPX Service Table using the service type you
specify. For example, to specify a print queue type, you
would enter 3 (0003h) in the space provided.
Table 16-10. IPX Service Table Search Parameters
Parameter Allows you to...
2 of 2
Table 16-11. IPX Service Table Parameters
Parameter Defines the...
Select Parameter selected.
Name Name of the service in question. For example, FS_ENG01.
(Use SLIST (NetWare 3.x™) or NLIST (NetWare 4.x™) to
list your current server names and types from your NetWare
server.)
1 of 2