Cli commands, Figure 19-15 – Avaya 580 User Manual
Page 562
19-18
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 19
Figure 19-15. Add/Delete Interface to NBP Filter Web Page
3. Select the interface to be added from the Add field pull-down menu.
Or
Click an interface from the Select column for the interface that you
want to be remove.
4. Click:
—
Add to add this NBP filter to the selected interface.
—
DELETE to remove this NBP filter from the selected interface.
—
CANCEL to restore previous settings.
CLI Commands
To add interfaces to an NBP filter using the CLI, use the following
command:
(configure)#
appletalk access-list <access-list-number> {permit |
deny} nbp <string>
To delete interfaces to an NBP filter using the CLI, enter the following
command from Configure mode:
(configure)#
no appletalk access-list <access-list-number> {permit |
deny} nbp <string>