Ransburg Turbodisk Fairing Assembly 70158 - Manual (Page 9)

INTRODUCTION
GENERAL DESCRIPTION
The primary purpose of the Ransburg Turbodisk
™ Fairing Assembly is to encapsulate the turbine
feed and support structure. This enclosure pro-
vides an environment which will reduce clean-up
time and potential down time from maintenance
problems caused by accumulated paint residue.
Along with the reduced clean-up time, there is of
course, reduced cost of clean-up supplies.
Thee instructions are for the installation of the
70158 Turbodisk Fairing Retrofit Kit for existing
Turbodisk installations. The unit illustrated herein
is one of two configurations. The alternative unit
differs only in the relative length of the 70155 Bulk-
head Assembly and the 70157 Fairing Assembly.
The installation procedures are the same for both
assemblies.
NOTES
6
Turbodisk Fairing Assembly - Introduction
AU-82-01.3
Ransburg