Rma-303 dual purge direct charge - parts, N o t e – Ransburg RMA Dual Purge Direct A12868 User Manual
Page 101
RMA-303 Dual Purge Direct Charge - Parts
LN-9267-11.3
98
For lengths above 15 Ft., the SAI, SAO,
and BRK require the next larger nominal
size ID tubing. This tubing is to be sup-
plied by User or Integrator.
Turbine air (TA) to be supplied at a maxi-
mum length of 6 Ft. User or Integrator
must increase to 12mm OD tube after 6 Ft.
N O T E
TURBINE AIR LINE TO BE 6 FOOT LONG
WRAP 88010-00 ELECTRICAL TAPE AROUND
ALL TUBES AND CABLES AT 2 FOOT INTERVALS
LABEL LOOSE ENDS OF TUBING WITH SIGNAL ABBREVIATION FOR IDENTIFICATION.
APPLY 7969-10 TO THREADS AS REQUIRED.
INSTALL 76566-24C (REF.) SOCKET HEAD CAP SCREWS INTO ROBOT ADAPTER.
APPLY 7969-03 TO THREADS AS REQUIRED.
3
4
5
6
7
8
TABLE A - TUBING ASSEMBLY LENGTH
DASH NO.
DESCRIPTION
A
0
AIR TUBING NOT INCLUDED
N/A
1
15 FT. LONG TUBING ASSEMBLY 15 FT.
2
30 FT. LONG TUBING ASSEMBLY 30 FT.
TABLE B - LOW VOLTAGE CABLE LENGTH
DASH NO.
B
DESCRIPTION
LENGTH
00
-----
N/A
----
01
A12241-15
15 FT.
02
A12241-25
25 FT.
03
A12241-40
40 FT.
04
A12241-50
50 FT.
05
A12241-75
75 FT.
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(HARD WIRE VERSION END AT MICROPAK)
06
A12433-25
25 FT.
07
A12433-50
50 FT.
08
A12433-75
75 FT.
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(HARD WIRE VERSION END AT MICROPAK)
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(HARD WIRE VERSION END AT MICROPAK)
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(HARD WIRE VERSION END AT MICROPAK)
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(HARD WIRE VERSION END AT MICROPAK)
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)
E
-----
A12239-06
A12239-06
A12239-06
A12239-06
A12239-06
A12433-25
A12433-50
A12433-75
------
25 FT.
------
50 FT.
------
75 FT.
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)
LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)
A12339-25
A12239-50
A12239-75
09
10
11