Rma-303 dual purge direct charge - parts – Ransburg RMA Dual Purge Direct A12868 User Manual
Page 94
![background image](/manuals/348109/94/background.png)
RMA-303 Dual Purge Direct Charge - Parts
91
LN-9267-11.3
RMA-303 DUAL PURGE DIRECT CHARGE ASSEMBLY - PARTS LIST
Item #
Part #
Description
Qty
30
75921-02
Fiber Optic Cable Assembly
1
31
79010-00
Cascade Assembly, HP 404 (Straight Con-
nector)
1
32
Table D, Item D
Shaping Air Kit
1
33
Table A, Item A
Bell Cup (See Note 7)
1
34
A12290-01
Cup Wash Tube Assembly (Front)
1
35
A12290-02
Cup Wash Tube Assembly (Rear)
1
36
Table D, Item E
Tool Kit
1
37
77141-23
Literature Kit (Not Shown)
1
Note 1
Tighten screws to a final torque of 15-20 lbs•in (1.69-2.26 Nm)
Note 2
Tighten air bolts to a final torque of 15 lbs•in (1.69 Nm)
Note 3
Tighten support rods to a final torque of 10-15 lbs•in(1.13-1.69 Nm)
Note 4
Torque fluid tube into atomizer body using A11229-00 tool to 65-76 lbs•in (7.34-8.47 Nm)
Note 5
Torque fluid tip using A11229-00 tool to 25-30 lbs•in (2.83-3.39 Nm)
Note 6
Lubricate all O-rings with Amojell (sparingly) to aid in installation
Note 7
Torque bell cup assembly to a final torque reading of 50-70 lbs•in (5.64-7.9 Nm)