Ransburg HV Controller A12311 - Manual (Page 15)

Mode Menu
Figure 11: Voltage Mode Screen
This menu displays the current mode (Voltage or
Current) and the high and low limits allowed for
the Dependent Value in that mode. All of these
values are changeable values.
Sensitivity Menu
Figure 12: Sensitivity Menu Screen
This menu displays the current di/dt or dv/dt
limit value and the enable status for di/dt or dv/dt
depending on the mode. These are changeable
values. If the current/voltage changes greater
than this value within approximately 100ms, a
fault signal is issued.
Fault Menu
Figure 13: Fault Menu Screen
This menu displays the latest fault and is displayed
automatically upon the fault detection.
Display Contrast Menu
below the password digit being changed instead of
beside them. When the new password is entered,
it will now be used for all values being changed.
Figure 14: Display Contrast Menu Screen
High Voltage Controller - Operation
13
Ransburg
LN-9623-00.1