ADTRAN 1200070L1 - Manual (Page 133)

61200.070L1-1 Express XL/XLT User Manual 117
Appendix A
Loop Status Messages
The Express XL/XLT displays current loop status of the ISDN on the bottom
center line of the terminal screen. The following messages are defined:
AT&T-5ESS Ready
The ISDN link layers 1 through 3 are up against an AT&T 5E switch and is
ready for calls.
AutoSpid Download
The Express XL/XLT is performing the Lucent SPID download feature.
AutoSpid X
A SPID is being attempted by ExpertISDN. X starts at 0 and counts up for each
SPID format.
CALL <number>
The Express XL/XLT is dialing the number.
Call Connect B1
Bearer channel B1 is active with a call.
Call Connect B2
Bearer channel B2 is active with a call.
Call Connect B1/B2
Bearer channels B1 and B2 are active with a call.
Connected 64K/2X64K/128K/144K
When the Express XL/XLT is in leased mode, this will appear when the link’s
layer 1 is up. The rate is determined by what it is configured for under Con-
figuration/WAN/ISDN/Leased/Rate.