Actiontec electronic 802PSG - Manual (Page 13)

10
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
11
Chapter 2 Setting Up the Print Server
6. The “Print server list” window appears, and the Setup program locates the
Print Server. If the Print Server does not appear in the “Choose Print Server”
list box, make sure it is connected properly, then click Refresh. When the
Print Server is located, click Next.
7. The “Name the print server” window appears. Enter a name for the Print
Server in the “Alias Name” text box, then click Next.
8. The “Network protocol configuration” window appears. If needed, change any
of the network settings. However, Actiontec recommends leaving the TCP/IP
settings unchanged. Click Next.