Actiontec electronic 802PSG - Manual (Page 17)

14
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
15
Chapter 2 Setting Up the Print Server
19. The “Configure Your Adapter’s IP Address” window appears. Make sure
“Automatically Obtain IP Settings (DHCP)” is active, then click Next.
20. The “Setup Status Summary” window appears. Make sure the settings are cor-
rect, then click Save.
21. In the popup window that appears, click Yes.
22. Back in the Actiontec Print Server Manager window, click Reboot in the toolbar.
After the computer restarts, the Print Server is connected and configured. Next, go
to “Configuring the Printer’s Settings” on the next page.