1 [parallel], and, As well as a reset button, Power port the power port (marked “12 – Actiontec electronic 802PSG User Manual
Page 7: Ports used to connect a, P2 [usb], p
4
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
5
Chapter 1 Introduction
Printer 3 Light
The Printer 3 light flashes when printing to the printer connected to the P3
(
USB
) port on the rear panel of the Print Server.
LAN Light
The
LAN
light illuminates when the Print Server is connected via its LAN port.
Rear Panel
The Print Server’s rear panel contains five ports (12VDC [Power], P3 [
USB
],
P2
[USB], P
1 [Parallel], and
LAN
), as well as a Reset button.
6A
LAN
P1
P2
P3
Reset
C
6A
12VDC 0.6
12VDC
12VDC 0.6
12VDC 0.6
6
C
6
6
Power Port
The Power port (marked “12
VDC
”) is used to connect the Print Server to an
electrical wall outlet via the Power adapter.
P2, P3 Ports
The P2 and P3 ports are
USB
ports used to connect a
USB
printer to the Print
Server.
P1 Port
The P1 port is a parallel port used to connect a parallel printer to the Print
Server.