AT&T 1760 - Manual (Page 26)

23
Making a Display Dial Call
1 Press C or c to locate the number in the call history that you want
to dial.
2 Lift the receiver of the phone connected to the system.
3 Press
d. The displayed number is dialed. (If you don’t lift the receiver
before pressing d, the system will not dial the number. Instead, the screen
displays Lift Receiver. You will need to repeat Steps 1–3.
NOTE: If there is no number on the screen or the screen displayed Err, no number
can be dialed.
No number can be dialed.
Display Dial Options
Use this feature if you want to check and/or change the way a number in call history
is dialed.
1 Press C or c to locate the number you want to call.
2 Lift the handset, then press d to make a call
— OR —
Press
o, then use the softkey to select CHANGE to see choices of how the
number can be dialed. (Each time you select CHANGE, you’ll see another choice.)
Lift the handset, then press d when your choice is displayed.
CALLER ID OPERATION
1760_book_1AT&T 5/1/00 7:38 PM Page 23