SecurityMan Air-AlArm1 - User manual - Manual (Page 19)

16
functions/features:
Nice, exquisite and weatherproof. •
Micro-computer controller, steady performance and quality. •
Study up to 10 pieces to a host. •
Built - in rechargeable battery for backup, automatic switches between AC powers to DC power in cases of emergency outage. •
Low standby power consumption, low battery voltage LED detection, resumes charging automatically. •
Wall mount installation •
specifications:
Operating power: 110~240VAC_50Hz •
Static power consumption: ≤40 mA •
Working power consumption: ≤450 mA •
The maximum alarm sound duration with flash: 3 Minutes •
Receiving distance: ≥300ft (in open area) •
Built-in Rechargeable battery 6VDC 1300mA (up to 100 hours stand-by) •
Alarm Siren Sound ≥120dB •
IP51 •
installation and usage
Plug in the AC power to an outlet; press the green button to enable the backup battery located on the back side of the outdoor siren. •
Study the siren to the alarm host according to the activation and deactivation instructions below. •
Unplug the siren from the AC power plug after you finish studying and find a proper location (Outdoor/indoor) to mount it , then plug in the •
AC power.
The alarm sound and red LED flash lasts up to 3 minutes if the alarm host is not disarmed within the 3 minutes.
•
When the backup battery has a voltage that is equal to or less than 5VDC, the charging indicator (solid red) light will come on to represent •
charging status. The rechargeable battery takes approximately 20 hours to be fully charged and then the charging indicator light will turn
off.
Activating and deactivating outdoor siren
To Activate:
Siren: Connect the siren to an AC power outlet > press the red Study button located on the back of the siren > the red siren lights will •
turn ON.