Audiovox AFX-1000 - Manual (Page 15)

Manual Phone Mode
RECEIVING A FAX
Use this mode if you want to receive document(s) after you have a voice conversation, or if you
plan to use your unit as a telephone.
1.
2.
3.
4.
5.
6.
Make sure the unit is ON. If not, turn ON the POWER SWITCH.
Make sure that the Slide Switch is in the PHONE position.
You can answer the telephone as you normally would and use it for voice communications.
After you complete your voice conversation and the remote operator is ready, press the START key
and hang up the telephone.
The calling machine then sends the document to your machine.
When the last document is received, the unit will return to the Standby mode.
Slide Switch
l
FAX-Auto Fax/Tel Switching Mode
l
Phone-Manual Phone Mode
Auto Fax/Tel Switching Mode
Use this mode to receive document(s) automatically when the machine is unattended or to have a
voice conversation.
-To set Auto FAX/TEL Switching Mode:
1. Make sure the unit is ON. If not, turn on the Power Switch.
2. Set the Slide Switch to FAX position.
-Operation
When an incoming call (Ring) is made your unit automatically determines whether the call is from a
FAX unit or a person:
l
IF A FAX is being sent: Your unit receives document(s) automatically.
l
IF it is a phone call: Your unit will ring for about 18 seconds. If you lift the handset during this
period, you can begin a conversation.
goes into auto fax receiving mode.
Note: If any communication error conditions occur, the unit
14
If you don’t lift the handset, your unit
sounds a warning tone.