Audiovox AFX-1000 - Manual (Page 8)

INSTALLATION INSTRUCTIONS
This section gives instructions for connecting the transceiver to your telephone line and AC Power Outlet.
AC Power Outlet Connection
Use only the power cord supplied with your machine to connect the machine to an AC power outlet.
Connecting the Telephone Handset
Plug the end of the flexible cord on the handset into the TEL Jack on the facsimile machine.
Telephone Line System
If you are installing this unit in an electronic or digital telephone system or PBX, it may not operate
correctly.
Consequently you may have to contact your local telephone company and have them install a separate
line that bypasses this equipment.
Telephone Line Connections
Connection Method No. 1
This is the normal connection method. Use this method if you intend to use the handset Auto-Answer and
Auto-Dial capabilities, as well as use the Handset for voice communications.
Plug one end of the TELEPHONE CORD into the STANDARD TELEPHONE CABLE CONNECTOR (WALL
JACK) and the other end of the cable into the LINE connector on your facsimile machine.
TELEPHONE CORD
TELEPHONE CABLE
CONNECTOR (LINE)
STANDARD TELEPHONE
ON YOUR MACHINE
CORD CONNECTOR
TELEPHONE
HANDSET
LINE TEL
Connection Method No. 2
Use this method if you have a multiline telephone. Connect the unit to one of the lines. This allows the
FAX to Auto-Answer and Auto-Dial undisturbed on the attached line. You can use the remaining lines for
voice communications. Use the facsimile unit HANDSET to talk to the remote operator if necessary.
Note that this connection will require help from your local telephone company.
MULTI-LINE
TELEPHONE CABLE
CONNECTOR (LINE)
ON YOUR MACHINE
HONE
TELEPHONE LINE 1
TELEPHONE LINE 2
I
TELEPHONE LINE 3
7