Audiovox AFX-1000 - Manual (Page 17)

SETTING AUTO DIAL
Assigning Telephone Location Numbers
This section describes how to assign telephone numbers for Auto Dial.
The machine can store a maximum of 9 telephone numbers of up to 18 digits each. You can assign
telephone numbers to Auto Dial Locations using the handset Key Pad.
1.
2.
3
4.
5.
Pick up the Handset.
Hold the Hook Switch down during programming procedure. With the Hook Switch depressed, use
the Key Pad to enter the telephone number you want to store. You can use all of the numbers except
the
l
and #keys. Use the PAUSE key to add a pause.
After the complete number has been entered press the Memory Key on the side of the handset.
Using the Key Pad, enter the Auto Dial Location Number (l-9). The telephone number is now stored
in the Auto Dial location.
Hang up the telephone handset.
Note: If you enter a phone number in an already occupied memory address, the new number will
erase the existing one.
Auto Dialing
Pick up the handset.
Press the RECALL key.
Use the Key Pad to enter the Location Number for the telephone number you want to call. The
unit will dial automatically.
Note: Make a list of Auto Dial locations and keep it close at hand.
16