SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 22)

20
Pump Program Scheduler
The Pump Program Scheduler (Figure 17) contains a list of AirChek 2000/3000
programs (or Pump Program Schedules) set by the Program Edit Bar. The pump
is programmed for a sampling operation by sending this list of programs to the
pump memory.
Programming Buttons
The Programming buttons (Figure 18) select the program parameters, insert
programs into the Pump Program Scheduler, write programs to the pump (upload),
and read programs from the pump (download).
Button Function
Clr ..........................erases the program in the Program Edit Bar
+Day ......................adds one day to the program in the Program Edit
Bar, which is useful for programming same start
and stop times on consecutive days
Insert .....................places the program displayed in the Program Edit Bar into the
Pump Program Scheduler
Cut .........................clears the selected (highlighted) program in the Pump Program
Scheduler and places it into the Program Edit Bar, where it can
be edited
FromPump ...........reads the program stored in the pump and displays it in the Pump
Program Scheduler (download)
ToPump ................writes the program displayed in the Pump Program Scheduler
to the pump (upload)
Insert Button
To insert the completed program from the Program Edit Bar into the Pump Program
Scheduler (Figure 17), click on the Insert Butt on (Figure 18). The Pump Program
Scheduler can contain up to 10 programs.
Figure 17. Pump Program Scheduler Containing One Program
Figure 18. Programming Buttons
SKC Pump Scheduler Window