SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 26)

24
Time Bump Buttons
The Time Bump butt ons (Figure 29) add or subtract the selected
time interval to all program Start and Stop Times in the Pump
Program Scheduler.
Time Interval
To select the time interval, click on a time interval butt on.
Minus Button
To subtract the interval to all programming steps, click on the
- butt on.
Plus Button
To add the interval to all programming steps, click on the
+ butt on.
Comm Checking Buttons
The Comm Checking butt ons (Figure 30) turn the communication checking function
on or off . Comm Checking monitors the interface cable connection with the pump.
The default value is On. If the interface cable becomes detached, an error message
displays (Figure 31). Reconnect the pump and click on Retry.
If programming more than one pump, turn Comm Checking off by clicking the
Off butt on. Turning Comm Checking off when programming multiple pumps will
eliminate the error message that displays each time the pump is disconnected.
When Comm Checking is turned off , the pump will enter Sleep mode fi ve minutes
aft er the last interaction between the computer and pump.
Figure 30.
Comm Checking Buttons Figure 31.
Error Message
Figure 29.
Time Bump
Buttons
SKC Pump Scheduler Window