Gilderfluke&Co old MACs 8 bit Digital Audio System - Manual (Page 101)

- Configuration Menu Commands -
I/O Address:
This allows you to set the location where the DAS-100 software expects to find the DAS-100
hardware. See the installation section of the manual for information on setting this value.
EPROM Size Right:
EPROM Size Left:
These commands let you set the size of the files which will be saved when you save an EPROM
image. It doesn't actually have anything to do with the types of EPROMs used, only the size of
the files which are saved. Sizes available are:
27C512 = 64 KBytes x 8 (512 Kbits)
27C010 = 128 KBytes x 8 (1 Mbits)
27C020 = 256 KBytes x 8 (2 Mbits)
27C040 = 512 KBytes x 8 (4 Mbits)
27C080 = 1024 KBytes x 8 (8 Mbits)
Rename Sample:
This command lets you enter a new name for the current sample.
Delete Sample:
This command lets you erase the current sample.
Erase This File Set:
This command lets you erase all of the files associated with the currently selected filename. As
this is a rather drastic thing to do, this command is hidden over here in the CONFIGURATION
MENU where you are less likely to hit it accidentally and it asks you 'Are you Sure' before
actually doing it.
Flag Byte Save:
If off, the EPROM image files are saved without the flag bytes which normally precede every 1
KByte block of data. It is normally left 'on'
G ILDERFLUKE & C o . ¥ 205 S OUTH F LOWER S T . ¥ B URBANK , C ALIF . 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485
91