Agilent Technologies Agilent E6474A - Manual (Page 112)

112 Agilent E6474A User’s Guide
6 Get Assistance, if You Need It
Test 2 - Receiver testing by measuring a known channel
Preparing the hardware
1 Connect the system as shown in Figure 53 .
2 Turn on the Agilent receiver.
Figure 53 System configuration for measuring a known channel in the system
NOTE
The Agilent receiver requires a 30-minute warm-up period to meet the
guaranteed specifications. There is a three-minute delay after power-up or
re-configuration, before the internal temperature sensor is activated and
measurements are nominally correct.