Agilent Technologies Agilent E6474A - Manual (Page 51)

Set Up Your System 3
Agilent E6474A User’s Guide 51
External GPS using the E6473B hub
Other types of external GPS systems can be connected to the
E6473B hub. This example shows the Garmin II Plus GPS
Receiver connected to the E6473B hub.
1 Connect the interface cable to the GPS receiver. See
Figure 21 .
2 Connect the D-shell connector of the cable to the AUX
port on the rear panel of the Direct Connect Hub. See
Figure 21 .
3 Connect the power plug to the lighter socket.
Agilent GPS/DR navigator
The Agilent GPS/DR navigation option (Option 30 and 31) is a
GPS Dead-Reckoning unit that can be connected to your system
using one of the following three methods:
Figure 21 Connect the GPS to the AUX connector