Foredom Series SR - Manual (Page 20)

20
43 Refine the stop cut at the primaries and the
tertials using a smooth end diamond cylinder or
flame.
44 Use a split sanding mandrel with 120-grit
cloth backed sandpaper or a sanding roll to
remove the wood and scratches left by the
Typhoon
® burs. This step will be repeated
again later.
45 Lay the sanding accessory on its side to
refine and maintain the canals for the side pock-
ets, the middle of back and the cheek pouch,
including the eye canal.
46 Use a split sanding mandrel with 150-grit
cloth backed sandpaper or a sanding roll to remove
wood and shape the area under and behind the
neck. Use a sanding mandrel to reach the area
where the neck and body join and under the chin.
41 Remove wood from under the tail and con-
tour from the rump to the tail using the same
Typhoon
®
sleeve or cylinder.
42 Use a smooth end diamond cylinder or a
flame to make a slight “v” on the top of the base
of the bill.