Inter-M PAM-520 - Manual (Page 6)

3 PAM-510/520
ATT. ZONE AMPLIFIER
Features Features
- SPEAKER SELECT(5ZONE SPEAKER OUTPUT)
Six speaker select switches enable you to select any combination of up to five speakers.
- SELECTABLE PRIORITY MUTING
Switchable audio signal priority for MIC Channels 1, siren, Chime and Telephone input over other input
sources.
- MONITOR SPEAKER
You can monitor output signal by using the monitor speaker, and can control the monitor level on front panel
by 3 step lever switch.
- ANNOUNCEMENT CHIME
Convenient four-tone chime for use with announcements.
- REMOTE CONTROL INPUT
Individual speaker zones can be selected and chime can be operated by wired remote control.
- EM(EMERGENCY)
When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.
- REMOTE POWER
You can turn on/off amplifier by remote control.
- INDIVIDUAL INPUT GAIN CONTROLS
Rear-panel gain controls for each input channel for total control of individual levels.
- MODULAR DESIGN
Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the
PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the
Accessories
One detachable AC power cord is provided for use with this product.
Operation Operation
Make certain that speakers and input sources are properly connected before switching on.
Keep volume levels turned down before switching on.
NOTE: The system’s operation is delayed by approximately three seconds after pressing the power switch. This is
due to the built-in protection circuitry, designed to protect the speakers and other system components.