ION Audio LP 2 CD User Manual
Page 12
10
SPLITTING TRACKS IN THE INTERNAL FLASH PLAYER
The Internal Flash Player allows you to split a selected track into two tracks, in case you may have missed
the transition when you first recorded your music to the Internal Flash Player. This is applicable if you have
disabled Auto Split and have chosen to split your tracks manually.
1.
Make sure that you are in Internal Flash Player Mode
(an orange LED next to “INT” should be lit). If the unit
is in CD Player Mode (green LED next to “CD”), press
[MENU] once and press [YES] when you see the
screen shown on the right to switch to Internal Flash
Player Mode.
2.
Locate the track which you would like to split, using the
[REW] and [FF] buttons.
3.
Press [PLAY] to play the selected track.
4.
Press and hold [FF] to locate the position where you
would like to split the track. If you go too far, you can
press and hold [REW] to scan backward.
5.
Once at the location where you would like to make the
split, pause the music.
6.
Press the [SPLIT TRK] button.
7.
You will see the screen displayed on the right. You
can preview the 2
nd
track resulting from the split by
pressing [PLAY] while on this screen. Hold down [FF]
or [REW] to quickly scan forward or backward in the
track. Press [STOP] to stop the preview.
Press [YES] to keep or press [NO] to cancel the split.
ERASING MUSIC FROM THE INTERNAL FLASH PLAYER
In situations where you might have made a mistake during the recording process, or if the unit’s flash
memory becomes filled to capacity, you have the option to erase songs.
To erase a single track:
1.
Make sure you are in Internal Flash Player Mode.
2.
Use [REW] or [FF] to select the track you wish to
erase. The currently selected track will be displayed in
the upper left corner (‘02’ in this example).
3.
Press [ERASE]. You will see the screen shown on the
right.
4.
Press [YES] to erase the currently selected track or
press [NO] to cancel the operation.
To erase all tracks:
1.
Make sure you are in Internal Flash Player Mode.
2.
Press [ERASE]. You will see a screen similar to the
one shown on the right.
3.
Press [SELECT] and you will see the screen change
as shown on the right.
4.
Press [YES] to erase all tracks currently stored in the
Internal Flash Player, or press [NO] to cancel.
Please note that there is no way to “undo” this
operation! If you press [YES], all tracks stored in
Internal Flash Player will be erased permanently.
Menu: Switch to
Flash Player?
Track Split!
Keep? YES or NO
INT:02/13 T56:14
Int Flash Player
INT:Erase Trk02?
YES or NO
INT:Erase Trk02?
YES or NO
INT:Erase ALL?
YES or NO