ION Audio LP 2 CD - Manual (Page 16)

14
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
My recordings sound loud
and distorted.
Recording level was too loud.
I can barely hear the
recorded audio when I play it
back.
Recording level was too soft.
It is important to carefully set your recording level prior to
recording. When you first press [RECORD] to enter Rec
Ready Mode, please check the level metering on the
display. Use the RECORD LEVEL knob to adjust the
level. At the loudest moments of the music, the meters
should hit the (-4) or (-2) mark but should not reach
(MAX). If the level of the audio signal is too “hot”, you
will see (!) flash on the right side of the display.
My records are playing at an
unusual pitch.
RPM switch not set correctly.
Please set the RPM switch as appropriate for the record
you wish to play (33/45/78).
I don’t hear anything when I
try to play or record audio
from my vinyl records.
PHONO / LINE switch set to
Line, instead of Phono. Set the PHONO / LINE switch to Phono to play and
record audio from the turntable.
I don’t hear anything when I
try to play or record external
sources connected to the
Line In.
PHONO / LINE switch set to
Phono, instead of Line.
Set the PHONO / LINE switch to Line to hear and record
audio from the external sources connected to the Line
In.
Erase tracks from Internal Flash Player which may have
already been burnt to a previous disc. In general, we
recommend that you erase the player contents after
each successful burn.
I get a “Not enough space on
blank CDR” message.
Internal Flash Player
contents exceed the
maximum capacity of the CD-
R you are attempting to burn.
Try a higher capacity CD-R. If using a 74min CD-R,
please try an 80min CD-R.
I get a “Too many tracks in
Flash to REC” message. Erase tracks from the Internal Flash Player to free up
space.
I get a “Can’t Record Flash is
Full” message.
Internal Flash Player is filled
to capacity.
Burn Internal Flash Player contents to CD-R, then erase
all tracks.
I can’t hear my record
playing.
LP 2 CD is already playing
audio from CD or from the
Internal Flash Player.
Press the [STOP] button to ensure that the unit is not
actively playing back or pausing a song.
Cartridge connection is not
secure. Cartridge must be securely connected to the tonearm
whenever you are using the turntable.
I am experiencing poor sound
quality.
Vinyl record is dirty or
scratched. Try dusting off and gently wiping the surface of the
record before playing it.
Enable Auto Split in the Menu options and try again.
See “Internal Flash Player Menu Options” section for
details.
My recording came out as
one continuous, long track,
instead of individual tracks.
Auto Split menu option was
disabled.
Use the [SPLIT TRK] to manually split your recordings
into individual tracks. See “Splitting Tracks in the
Internal Flash Player” section for details.
LP 2 CD HOT KEYS
BUTTON COMBINATION
DESCRIPTION
RECORD + STOP Forces system to load an OS (Operating System) upon startup.
Please visit www.ion-audio.com regularly for updates.
RECORD + PLAY Restores the default system parameters.