ION Audio LP 2 CD - Manual (Page 13)

11
INTERNAL FLASH PLAYER MENU OPTIONS
To access different menu options while in Internal Flash Player Mode, press the [MENU] button. To step
through menu options, continue to press the [MENU] button. To change the selected setting, press the
[SELECT] button. The available menu options are described below:
Switch to CD Player Mode
This option allows you to manually switch to CD Player
Mode. Press [YES] to switch.
Move Track
This option allows you to re-organize stored recordings by
moving a track to a new location. The track which will be
moved is the track which was selected before entering the
menu options (Track “01” in the example to the right).
The destination track is indicated in the ‘New’ field and can
be incremented and decremented with [FF] and [REW],
respectively. Once you have selected the desired
destination, press [YES] to move the track.
Auto Split
Auto Split is a feature which automatically detects silence
between songs and splits the recording into tracks in real-
time. By default, this option is enabled. However, you may
choose to disable this option and set track markers
manually.
Press [SELECT] to enable or disable Auto Split.
Repeat Mode
This option allows you to repeat a single track or the entire
collection of recordings stored in the Internal Flash Player.
Options include Repeat Off, Repeat Track, Repeat All.
While on this menu page, press [SELECT] to toggle
between these options.
System Info
This page displays the unit’s firmware version. While on
this page, press [SELECT] to cycle through the information
fields.
Note: System information may be required when contacting
our Technical Support team.
Menu: Repeat
Repeat Off
Menu: Switch to
CD Player Mode?
Menu: Move Track
Old:01 -> New:02
Menu: SystemInfo
Software: 1.00
Menu: Auto Split
On