ION Audio Discover Guitar USB - Manual (Page 4)

4
FEATURES
1.
Guitar Audio output: Sends audio from guitar to the
amplifier.
2. Tone Control Knob: This control knob adjusts the tone of
the last pick-up (furthest from the neck).
3. Tone Control Knob: This control knob adjusts the tone of
the first pick-up (closest to the neck).
4. Volume Control Knob: This knob controls the volume
output before the sound reaches the amplifier.
5. Pick-up Selector Switch: This toggle switch allows you to
select which pickups are used to capture the sound from
the guitar strings. With the switch positioned closest to the
strings, selects the first pick-up. Positioned away from the
strings selects the last pick-up. In between positions select
combinations of pick-ups.
6. Pick-Ups: These capture the sound made by the strings to
be sent to the amplifier.
7. Frets: Raised bars on the neck of the guitar that designate
where the strings should be pressed to change the sound
of the string.
8. Neck: The part of the guitar that allows the user to change
the note of the strings, as well as stretch the strings to give
them a tonal quality.
9. Keys: Rotate these knobs to tune/adjust the pitch of its
corresponding string.
10. Headstock: Houses the keys for tuning and winding the
strings.
11. Whammy Bar Receiver: Attach the whammy bar by
screwing it in clockwise.