KB Electronics KBDA-48 - Manual (Page 26)

26
FIGURE 19 – FLOW CHART TO PROGRAM ACCEL TIME FROM 1.5 SECONDS TO 120 SECONDS
("FWD", "STOP", "Hz" LEDs On)
Set Frequency Flashes
POWER ON
Digit Flashes
Group No.
("PGM" LED On)
Press Program Key
to Display
Function No.
to Increase Digit
Press Up Key 3 Times
Digit Flashes
Group No. Press Shift Key 2 Times
to Move Digit Digit Flashes
Code No.
to Increase Digit
Press Up Key 3 Times
Accel Function No.
Digit Flashes
to Set Frequency Display
to Return
Press Display Key
which Confirms Programming
"End" Momentarily Displays
to Save New
Press Enter Key
Accel Time
Digit Flashes
Accel Time
Accel Time
Digit Flashes to Move Digit
Press Shift Key 1 Time
Digit Flashes
Accel Time Code
to Read
Press Read Key
Accel Time
Digit Flashes
Accel Time * Press Shift Key 1 Time
to Move Digit
Digit Flashes
Accel Time Press Down Key 1 Time
to Decrease Digit to Move Digit
Press Shift Key 1 Time
Digit Flashes
Accel Time
Digit Flashes
Accel Time Press Up Key 2 Times
to Increase Digit
Accel Time
Digit Flashes
Press Shift Key 1 Time
to Move Digit
Accel Time
Digit Flashes
Press Up Key 1 Time
to Increase Digit
Digit Flashes
Accel Time
to Decrease Digit
Press Down Key 5 Times
*The factory setting of Accel Time (Function No. 3.03) is “1.5” seconds. The minimum setting of Accel is
0.1 seconds, therefore, the left digits must be changed first since an Accel setting of 000.0 is not allowed.