KB Electronics KBWA-23D - Manual

INSTALLATION AND OPERATION MANUAL
KBWA SERIES
HYBRID DRIVE™
Digital Drive with Analog Interface
KBWA-23D: NEMA 1 / IP20 (Vented) Enclosure
KBWA-22D, 21D, 2P6D, 2P3D: NEMA 1 / IP50 (Non Vented) Enclosure
Rated for 208 – 230 Volt 50 and 60 Hz
Subfractional thru 1/2 HP 3-Phase AC and PSC* Induction Motors
Operates from 115 and 208/230 Volt 50/60 Hz AC Line Input
Variable Speed / Soft Start
with Electronic Motor Overload Protection
Provision for
Forward-Stop-Reverse
Switch (supplied).
(See Sec. 6, on p. 18)
*Operation with
PSC Motors requires
factory programming.
RoHS
This Manual Covers Models KBWA-23D, 22D, 21D, 2P6D, 2P3D
SEE
SAFETY WARNING
ON PAGE 2
IMPORTANT
AC Line Input Voltage Setting: The drive is factory set for
208/230 Volt AC Line input. For 115 Volt AC Line input, see
Section 7.1, on page 19.
Motor Frequency Setting: The drive is factory set for 60 Hz
Motors. For 50 Hz Motors, see Section 4.1, on page 13.
Copyright © 2014
KB Electronics, Inc.
(see back cover)