LevelOne WCS-0050 - Manual (Page 35)

- 30 -
DHCP - Get IP address automatically. Select this option to obtain an available dynamic IP
address assigned by a DHCP server each time the camera is connected to the LAN.
Static IP - Select this option to manually assign a static IP address to the Network Camera.
Enter the static IP address, Subnet mask, Default Gateway, Primary and Secondary DNS
provided by your ISP.
PPPoE - (Point-to-point over Ethernet): Choose this connection type if you are connected
to the Internet via a DSL Line. Note that to utilize this feature, it requires an account
provided by your ISP. Enter the user name and password provided by your ISP.
Click Apply or Reset to take effect.
UPnP
Only UPnP discovery supported. Enable this function to allow the user to search for devices of
interest on the network. Enter the UPnP name as you wish to show on the intranet.