LevelOne WCS-0050 - Manual (Page 42)

- 37 -
Network Mode - From this drop-down menu, you can select the wireless standards running on
your network. If you have both Wireless-B, Wireless-G and Wireless-N (2.4GHz) devices in your
network, keep the default setting, Mixed. If you have both Wireless-B, Wireless-G devices in
your network, select BG-Mixed. If you have only Wireless-B devices, select Wireless-B Only. If
you have only Wireless-G devices, select Wireless-G Only. If you have only Wireless-N
(2.4GHz) devices, select Wireless-N Only.
Radio Band - The settings are available for the Auto-20/40MHz channel and Standard-20 MHz
channel. The Auto-20/40MHz channel set up a network using the 20/40MHz band, and the
Standard-20 MHz channel set up a network using the 20 MHz band.
Enable WMM (802.1e QoS) - WMM is a wireless Quality of Service feature that improves quality
for audio, video, and voice applications by prioritizing wireless traffic. To use this feature, your
wireless client devices in your network must support Wireless WMM. If you would like to disable
this feature, select Disabled. Otherwise, keep the default, Enabled.
Wi-Fi Protected Setup
Use this method if your client device has a Wi-Fi Protected Setup PIN number.
1. Enter the PIN number and SSID from the device in the field on the screen.
Click Apply or Reset to take effect.