Ip filter, Firmware upgrade – LevelOne WCS-0050 User Manual
Page 54
Advertising
- 49 -
IP Filter
IP Filter - Enable the IP filter and set of allow or deny IP address range to server. Click
Add to list to add the IP range to the IP filter list.
Click Apply or Reset to take effect.
Firmware Upgrade
This feature allows you to upgrade the firmware on your Network Camera. It takes about few
minutes to complete the process. Note that do not power off the Network Camera during the
upgrade.
Upgrade - Click Browse… and specify the firmware file. Click Upgrade. The Network
Camera starts to upgrade and will reboot automatically when the upgrade completes.
Advertising