LevelOne WBR-6003 - Manual (Page 31)

31
Wireless Settings
Wireless: Enabled by default. Disabling this will turn off the wireless feature of this unit.
Schedule Rule: You can Enable / Disable wireless by schedule rule, and choose the Schedule rules
you want to apply in draw down list. If you enable this function, you can click “Schedule Setting”
button to setup Schedule Rule setting. For further setting please see “page 64” Schedule Rule.
Network ID (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local
area network (WLAN). The SSID's factory default setting is LevelOne. The SSID can be easily
changed to establish a new wireless network.
Note: SSID names may contain up to 32 ASCII characters.
Wireless Mode: You can choose the wireless mode to IEEE 802.11b/g Mixed mode, IEEE 802.11g
only, or IEEE 802.11b only
.
SSID Broadcast: The WBR-6003 will broadcast beacons that contains SSID and other wireless
information so that Computers or other wireless devices can find the WBR-6003 when scanning for
wireless networks. Disable this function if you want to hide your wireless network.
WMM: Choose to Enable or Disable WMM (WiFi Multimedia) function. This function provides features
that improve audio, video and voice applications over the wireless network.
Channel: The radio channel number. The permissible channels depend on the Regulatory Domain.
The default is AUTO which means the WBR-6003 will find the least used channel to avoid
interference.