LevelOne WBR-6003 - Manual (Page 54)

54
MAC Address Control
MAC Address Control allows you to assign different access right for different users and to assign a
specific IP address to a certain MAC address.
To enable MAC Address Control, make sure to tick on Enable.
All of the settings in this page will take effect only when “Enable” is checked.
There are two types of control method available:
•
Connection Control: To control which wired and wireless clients can connect to this device. If
a client is denied access, it means the client cannot access the Internet either. Choose “allow”
or “deny” to allow or deny the clients whose MAC addresses are not in the list.
•
Association Control: To control which wireless client can be associated with this device. If a
client is denied, then it means the client cannot send or receive any data via this
WBR-6003. Choose “allow” or “deny” to allow or deny the clients with MAC addresses that are
not in the list to associate to the wireless network.