LevelOne WBR-6003 - Manual (Page 58)

58
System Time
This page allows you to set the time settings of the WBR-6003.
There are three ways to set up the System Time of the WBR-6003.
1. Get Date and Time by NTP Protocol: Selected if you want to get the Date and Time from an
NTP server. A Time Server and time zone is required. Once entered, click Sync Now to sync
the time with the Time Server.
2. Set Date and Time using PC’s Date and Time: Set the Date and Time using the settings
from your computer.
3. Set Date and Time manually: Selected if you want to Set Date and Time manually.
Daylight Saving:
If required, set the Daylight Saving settings by selecting Enable and define the Start and End dates
for daylight savings periods.