LevelOne WGR-6013 - Manual (Page 33)

33
 Coexistence (Ether or PPPoE Dual Stack)

Select WAN type Ether or PPPoE: Almost ISPs follow the setting of IPv4 to connect
IPv6 , for example, use the same account and Password in the PPPoE of IPv4 Page.

IPv6 DNS (WAN IPv6 address) settings: You may select to obtain DNS server address
automatically or use following DNS address. You may add IPv6 address Primary DNS
address and secondary DNS address.

IPv6 SPI: The firewall settings section is an advance feature used to allow or deny
traffic from passing through the device.
 LAN IPv6 address settings: Please enter “LAN IPv6 address” and ignore the “LAN
IPv6 Link- Local address”.

Address auto configuration settings:
Auto-configuration: Disable or enable this auto configuration setting.
Auto-configuration type: You may set stateless or stateful (Dynamic IPv6).