LevelOne WGR-6013 - Manual (Page 35)

35

Address auto configuration settings:
Auto-configuration: Disable or enable this auto configuration setting.
Auto-configuration type: You may set stateless or stateful (Dynamic IPv6).
 6RD

Remote IPv4 address: Enter Remote IP Address

Remote IPv6 Address/Prefix Length: Enter the IPv6 address here; IPv6 addresses
have a size of 128 bits. Therefore, IPv6 has a vastly enlarged address space
compared to IPv4. An example of an IPv6 address is
“2001:0db8:85a3:0000:0000:8a2e:0370:7334”.Then enter the Prefix length of the
Subnet Mask here; The subnet mask was the forerunner of the modern IP address
prefix length. For example a subnet mask of 255.255.255.0 conveys exactly the same
information as a prefix length of /24, a subnet mask of 255.255.255.240 is equivalent to a
prefix length of /28.

IPv6 DNS (WAN IPv6 address) settings: You may select to obtain DNS server address
automatically or use following DNS address. You may add IPv6 address Primary DNS
address and secondary DNS address.

IPv6 SPI: The firewall settings section is an advance feature used to allow or deny