LevelOne WGR-6013 - Manual (Page 69)

69
Control table
"Control table" is the table at the bottom of the "MAC Address
Control" page. Each row of this table indicates the MAC address
and the expected IP address mapping of a client. There are four
columns in this table:
MAC Address MAC address indicates a specific client.
IP Address Expected IP address of the corresponding
client. Keep it empty if you don't care its IP
address.
C When "Connection control" is checked,
check "C" will allow the corresponding
client to connect to this device.
A When "Association control" is checked,
check "A" will allow the corresponding
client to associate to the wireless LAN.
In this page, we provide the following Combobox and button to help you to input the MAC
address.
You can select a specific client in the “DHCP clients” Combobox, and then click on the “Copy
to” button to copy the MAC address of the client you select to the ID selected in the “ID”
Combobox.
Previous page and Next Page To make this setup page simple and clear, we have divided
the “Control table” into several pages. You can use these
buttons to navigate to different pages.
Example: