LevelOne WBR-3470 - Manual (Page 44)

PPPoE Routed Connections
PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services
using PPP.
Description: A user-definable name for this connection.
VPI/VCI: Enter the information provided by your ISP.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single ISP account, sharing a single IP address. If users on your LAN
have public IP addresses and can access the Internet directly, the NAT function can be
disabled.
Username: Enter the username provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive). This is in the format of “username@ispname”
instead of simply “username”.
Password: Enter the password provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive).
Service Name: This item is for identification purposes. If it is required, your ISP provides
you the information. Maximum input is 20 alphanumeric characters.
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP
address from your ISP.
Authentication Protocol: Default is Chap. Your ISP advises on using Chap or Pap.
Connection:
42