LevelOne WBR-3470 - Manual (Page 47)

provided it when you logon. Usually when you choose PPPoE or PPPoA as your WAN - ISP
protocol, the ISP provides the DNS IP address automatically. You may leave the
configuration field blank. Alternatively, your ISP may provide you with an IP address of their
DNS. If this is the case, you must enter the DNS IP address.
If you choose one of the other protocols, RFC1483 Routed or Bridged, check with your ISP,
as it may provide you with an IP address for their DNS server. You must enter the DNS IP
address if you set the DNS Server address on your PC to the LAN IP address of this router.
4.3.2.3 ADSL
ADSL Mode: There are four modes for WBR-3470A “Open Annex Type and Follow
DSLAM’s Setting”, ”Annex A Only”, ”Annex L Only” and ”Annex M Only” that user can
select for this connection.
Note: For Annex B, There is only one operation mode as “Annex B”
Modulator: There are four modes “AUTO”,”ADSL multimode”,”ADSL2”and”ADSL2+”
that user can select for this connection.
DSP Firmware Version: DSP code version
DMT Status: DMT Status
Operational Mode: To show the state when user select “AUTO” on connect mode.
Upstream: Upstream rate
Downstream: Downstream rate
45