7 advanced, 1 static route – LevelOne WBR-3470 User Manual

Page 79

Advertising
background image

4.3.7 Advanced

Configuration options within the Advanced section are for users who wish to take
advantage of the more advanced features of the router. Users who do not understand the
features should not attempt to reconfigure their router, unless advised to do so by support
staff.

There are six items within the Advanced section: Static Route, Dynamic DNS, VLan
Control, Device Management. IGMP
and WAN IP Change Albert.

4.3.7.1 Static Route

Click on Routing Table and then choose Create Route to add a routing table.

Destination: The destination subnet IP address.

Netmask: Subnet mask of the destination IP addresses based on above destination.

Gateway: The gateway IP address to which packets are forwarded.

Interface: Select the interface through which packets are forwarded.

Cost: Represents the cost of transmission for routing purposes. The number need not be

precise, but it must be between 0 and 65535.

77

Advertising