Network bde) – LevelOne PLI-4510 User Manual
Page 28
Advertising
26
4.3 Removing Bridge B from Bridge A & C Network and join with Bridge D
& E (Network BDE)
The procedure is as follows:
1. Press and hold the Security button on Bridge B for no more than 10 seconds. Must release after 10
seconds. Once released, the Power light will flash.
The password to Bridge B has just been erased and removes itself from Bridge A & C.
2. Press and hold the Security button on Bridge D for 1~3 seconds.
3. Within 120 seconds after the Power light on Bridge D starts to flash, press and hold the Security button on
Bridge B for 1~3 seconds then release.
4. Bridge B and Bridge D are now connected to each other, which in turn becomes part of Network BDE.
Advertising